Texts, rectangle and ellipse are placed in wrong location and size when font size diff 100%
Moderators: XnTriq, helmut, xnview, Dreamer
Texts, rectangle and ellipse are placed in wrong location and size when font size diff 100%
Hello,
I love Your program and using it intensively.
That probably why I have found this bug.
It would be nice to fix it, so I don't have to use other software for adding texts
Path to reproduce:
Movie showing below steps is available here: https://www.screencast.com/t/RrZMMoA1 (unblock Flash to see movie). Movie was not recorded in full screen resolution.
0) Set "Screen Resulution" -> "Font size..." to 150%. (I guess value different from 100%) (attached 150.png file)
1) Open picture that is bigger then your screen resolution (attached "black.png" file 3928x2210) (e.g. twice size that your screen resolution - my resolution 1920x1080)
2) Click "Draw" icon on toolbar - "Draw" window will appear
3) Enter the text at the bottom of the screen (attached "Draw.png" file)
4) Accept changes by clicking "OK"
Observed:
Text will appear in the middle of the image instead of botton (attached "AfterOK.png" file)
Expected:
Text in correct size appear in the correct location.
Notice:
Problem noticed on: XnView MP Windows Version 0.87 64bits (Sep 7 2017).
I observed problem also on: XnView MP Windows Version 0.86.
I am using Windows 10 64bits.
Reinstallation doesn't help. I do not remember that I have uninstalled 0.86 and then installed 0.87 or installed 0.87 on the 0.86, but it doesn't help solve the issue.
I guess prblem is when picture is bigger then your screen resolution.
It looks problem is not related to "Draw" window size.
I tried "Times New Roman" "Arial" and "Calibri" fonts - problem exist for all of them.
The same problem is observed for "Draw a rectangle" and "Draw an ellipse" commands
Workaround:
Set "Screen Resulution" -> "Font size..." to 100%. (attached 150.png file)
Solution:
Problem is fixed in XnView MP 0.88 version.
Thank you in advance for Your help,
Andrew
I love Your program and using it intensively.
That probably why I have found this bug.
It would be nice to fix it, so I don't have to use other software for adding texts
Path to reproduce:
Movie showing below steps is available here: https://www.screencast.com/t/RrZMMoA1 (unblock Flash to see movie). Movie was not recorded in full screen resolution.
0) Set "Screen Resulution" -> "Font size..." to 150%. (I guess value different from 100%) (attached 150.png file)
1) Open picture that is bigger then your screen resolution (attached "black.png" file 3928x2210) (e.g. twice size that your screen resolution - my resolution 1920x1080)
2) Click "Draw" icon on toolbar - "Draw" window will appear
3) Enter the text at the bottom of the screen (attached "Draw.png" file)
4) Accept changes by clicking "OK"
Observed:
Text will appear in the middle of the image instead of botton (attached "AfterOK.png" file)
Expected:
Text in correct size appear in the correct location.
Notice:
Problem noticed on: XnView MP Windows Version 0.87 64bits (Sep 7 2017).
I observed problem also on: XnView MP Windows Version 0.86.
I am using Windows 10 64bits.
Reinstallation doesn't help. I do not remember that I have uninstalled 0.86 and then installed 0.87 or installed 0.87 on the 0.86, but it doesn't help solve the issue.
I guess prblem is when picture is bigger then your screen resolution.
It looks problem is not related to "Draw" window size.
I tried "Times New Roman" "Arial" and "Calibri" fonts - problem exist for all of them.
The same problem is observed for "Draw a rectangle" and "Draw an ellipse" commands
Workaround:
Set "Screen Resulution" -> "Font size..." to 100%. (attached 150.png file)
Solution:
Problem is fixed in XnView MP 0.88 version.
Thank you in advance for Your help,
Andrew
Last edited by picpros on Mon Nov 06, 2017 5:10 pm, edited 12 times in total.
Re: Texts are placed in wrong position and wrong size
strange, i can't reproduce. Could you send me the image used?
Pierre.
Re: Texts are placed in wrong position and wrong size
Right!
I attached "black.png" (in previous post) that I have used.
Is there anything more that I can do, to help you track the problem?
I attached "black.png" (in previous post) that I have used.
Is there anything more that I can do, to help you track the problem?
Re: Texts are placed in wrong location and wrong size
I can't reproduce either, a possible misunderstanding about how the text tool should be used??
o Text size set is in pixels, I presume, so text will appear smaller when image dimensions are larger.
o After setting the text parameters, when the mouse cursor is moved over the image it should change into a small cross, which is the text insertion point when the left mouse button is clicked. Text is always inserted where expected in my tests even when the image is larger than the screen dimensions.
o After text insertion as above, the mouse cursor changes into a four-headed arrow which enables the entered text to be moved, until 'OK' is clicked.
o Blank lines in the text entry box above or below the desired text may affect the position at which the desired text is inserted.
Otherwise, perhaps more details of your detailed steps, or ideally a video recording?
o Text size set is in pixels, I presume, so text will appear smaller when image dimensions are larger.
o After setting the text parameters, when the mouse cursor is moved over the image it should change into a small cross, which is the text insertion point when the left mouse button is clicked. Text is always inserted where expected in my tests even when the image is larger than the screen dimensions.
o After text insertion as above, the mouse cursor changes into a four-headed arrow which enables the entered text to be moved, until 'OK' is clicked.
o Blank lines in the text entry box above or below the desired text may affect the position at which the desired text is inserted.
Otherwise, perhaps more details of your detailed steps, or ideally a video recording?
Re: Texts are placed in wrong location and wrong size
Thank You for such detailed description - it is very rare to get professional help.
I can't attach .swf movie, so I am sharing it through screencast.com service. It shows how it behavies on my machine:
In the movie I am reproducing above steps: https://www.screencast.com/t/RrZMMoA1 (unblock Flash to see movie (e.g. in Edge))
Additional tests:
I tried "Times New Roman" "Arial" and "Calibri" fonts - problem exist for all of them.
The same problem is observed for "Draw a rectangle" and "Draw an ellipse" commands
How I can help more?
I can't attach .swf movie, so I am sharing it through screencast.com service. It shows how it behavies on my machine:
In the movie I am reproducing above steps: https://www.screencast.com/t/RrZMMoA1 (unblock Flash to see movie (e.g. in Edge))
Additional tests:
I tried "Times New Roman" "Arial" and "Calibri" fonts - problem exist for all of them.
The same problem is observed for "Draw a rectangle" and "Draw an ellipse" commands
How I can help more?
Re: Texts, rectangle and ellipse are placed in wrong location and wrong size
I tracked it - Hooray!!
Problem exist when "Screen Resulution" -> "Font size..." is set to 150%.
I believe value different from 100%.
Problem exist when "Screen Resulution" -> "Font size..." is set to 150%.
I believe value different from 100%.
Re: Texts, rectangle and ellipse are placed in wrong location and size when font size diff 100%
Thanks to your detailed description I can reproduce the problem.
Pierre.
Re: Texts, rectangle and ellipse are placed in wrong location and size when font size diff 100%
Thank You in advance for fix
Andrew
Andrew
Re: Texts, rectangle and ellipse are placed in wrong location and size when font size diff 100%
This problem is supposed to be fixed in XnView MP 0.88. Please check and confirm the bug fix here.
Pierre.
Re: Texts, rectangle and ellipse are placed in wrong location and size when font size diff 100%
Huray!!
Thank You for the fix!
I confirm, problem is fixed in XnView MP version 0.88.
Andrew
Thank You for the fix!
I confirm, problem is fixed in XnView MP version 0.88.
Andrew