Page 9 of 14

Re: XnView Shell Extension : localization issue

Posted: Thu Jan 24, 2019 4:11 pm
by LaurentG
Hi,

I have just installed for the first time XnShell extension on Win7 64 bits.
And I discovered that language change do not work in this version (4.0 64 bits.)

Actually, this is due to the fact that HKEY_CURRENT_USER\Software\XnView\ShellEx\language is not correctly set, but contains extra characters (most often two chars, sometimes more) after language code.
If I update manually the entry (with Regedit) to a correct value (eg. "fr"), it works fine.

But registry entry is overwritten each time any option is changed... and then require to be re-set manually at each time with Regedit.

Re: XnView Shell Extension

Posted: Thu Jan 24, 2019 10:35 pm
by emmequ
xnview wrote: Sat Jan 19, 2019 8:21 am
emmequ wrote: Fri Jan 18, 2019 5:30 pm i tried also to disinstall all xn software + vcredist_x64 and reboot any time. reinstall all and rebot but don't work. i think that there is some of my software that caused an incompatibility.
Same thing?
After i tried also a register with bat file.
you need to run the .bat with admin rights
yes, i launch all with admin rights but an all 3 pc doesn't work.
when i click on xnview option from right click the preview of the file don't appear.
:idea:

last question. usually it is possible install only xnview shell or it need xnview classic?

Re: XnView Shell Extension : localization issue

Posted: Mon Jan 28, 2019 1:51 pm
by xnview
LaurentG wrote: Thu Jan 24, 2019 4:11 pm Hi,

I have just installed for the first time XnShell extension on Win7 64 bits.
And I discovered that language change do not work in this version (4.0 64 bits.)

Actually, this is due to the fact that HKEY_CURRENT_USER\Software\XnView\ShellEx\language is not correctly set, but contains extra characters (most often two chars, sometimes more) after language code.
If I update manually the entry (with Regedit) to a correct value (eg. "fr"), it works fine.

But registry entry is overwritten each time any option is changed... and then require to be re-set manually at each time with Regedit.
ok, right, an update will be soon available...

Re: XnView Shell Extension

Posted: Mon Jan 28, 2019 2:17 pm
by xnview
emmequ wrote: Thu Jan 24, 2019 10:35 pm yes, i launch all with admin rights but an all 3 pc doesn't work.
when i click on xnview option from right click the preview of the file don't appear.
I've tried on a clean Win10 x64, and no problem :?
Please try to remove HKCU>Software>XnView>ShellEx from registry
last question. usually it is possible install only xnview shell or it need xnview classic?
you can install it without XnView

Re: XnView Shell Extension

Posted: Mon Jan 28, 2019 4:03 pm
by emmequ
xnview wrote: Mon Jan 28, 2019 2:17 pm
I've tried on a clean Win10 x64, and no problem :?
Please try to remove HKCU>Software>XnView>ShellEx from registry

you can install it without XnView
i'm think i'm wrong somethink in the installation, beacuse i tried again the installation on other 2 pc where never was installed xn software , i install only xnshell but there is the same problem... the register.bat procedure is required?
in attachment the screenshot of my installation folder

Re: XnView Shell Extension

Posted: Mon Jan 28, 2019 4:13 pm
by xnview
emmequ wrote: Mon Jan 28, 2019 4:03 pm i'm think i'm wrong somethink in the installation, beacuse i tried again the installation on other 2 pc where never was installed xn software , i install only xnshell but there is the same problem... the register.bat procedure is required?
in attachment the screenshot of my installation folder
Please use the setup

Re: XnView Shell Extension

Posted: Mon Jan 28, 2019 4:19 pm
by emmequ
xnview wrote: Mon Jan 28, 2019 4:13 pm Please use the setup
sure, i always used setup.
i install with .exe file, then rebot, but without succes

thanks for support, maybe i will retry with future update

Re: XnView Shell Extension

Posted: Tue Jan 29, 2019 6:27 am
by xnview
emmequ wrote: Mon Jan 28, 2019 4:19 pm thanks for support, maybe i will retry with future update
In your video, why there is a blank area above XnShell item menu?

Re: XnView Shell Extension

Posted: Tue Jan 29, 2019 8:11 am
by emmequ
xnview wrote: Tue Jan 29, 2019 6:27 am
emmequ wrote: Mon Jan 28, 2019 4:19 pm thanks for support, maybe i will retry with future update
In your video, why there is a blank area above XnShell item menu?
i don't know, but on all computer where i try to install it, don't appear the preview of the picture and there is that blank area up the menu voice

Re: XnView Shell Extension : localization issue

Posted: Tue Jan 29, 2019 8:12 am
by LaurentG
xnview wrote: Mon Jan 28, 2019 1:51 pm
LaurentG wrote: Thu Jan 24, 2019 4:11 pm Hi,

I have just installed for the first time XnShell extension on Win7 64 bits.
And I discovered that language change do not work in this version (4.0 64 bits.)

Actually, this is due to the fact that HKEY_CURRENT_USER\Software\XnView\ShellEx\language is not correctly set, but contains extra characters (most often two chars, sometimes more) after language code.
If I update manually the entry (with Regedit) to a correct value (eg. "fr"), it works fine.

But registry entry is overwritten each time any option is changed... and then require to be re-set manually at each time with Regedit.
ok, right, an update will be soon available...
Many thanks for quick update :D
I confirm it works fine, now, with rev 4.0.3

Re: XnView Shell Extension

Posted: Tue Jan 29, 2019 4:15 pm
by xnview
emmequ wrote: Tue Jan 29, 2019 8:11 am i don't know, but on all computer where i try to install it, don't appear the preview of the picture and there is that blank area up the menu voice
could you try the new version?

Re: XnView Shell Extension

Posted: Wed Jan 30, 2019 5:28 pm
by emmequ
xnview wrote: Tue Jan 29, 2019 4:15 pm could you try the new version?
yes, last time i already tried new version ;)
2019-01-30 18_27_22-Clipboard.jpg
2019-01-30 18_27_22-Clipboard.jpg (8.58 KiB) Viewed 7690 times

Re: XnView Shell Extension

Posted: Thu Jan 31, 2019 10:29 am
by lostinpixels
Hello and Thank you for your great programs (xnviewMP is amazing)

I have used the shell extension back in xp and win7 with success - but nothing I tried gets it to work on Win10 (1709).

I've tried all sorts (I know my way around windows) - including latest version, MS runtimes, admin, ownership, install vs zip, registry etc

The context menu does appear but nothing happens when choosing an action (any). If i edit the registry I can change the appearance of the menu
(as when going into options) - which means the shell does read and load the registry settings - but that is the only sign of life.

If anyone can help I would be very grateful - Thanks

Re: XnView Shell Extension

Posted: Thu Jan 31, 2019 2:20 pm
by xnview
lostinpixels wrote: Thu Jan 31, 2019 10:29 am The context menu does appear but nothing happens when choosing an action (any). If i edit the registry I can change the appearance of the menu
(as when going into options) - which means the shell does read and load the registry settings - but that is the only sign of life.
Same as previous user :( Is it a clean Windows 10? Which version?

Re: XnView Shell Extension

Posted: Thu Jan 31, 2019 6:43 pm
by lostinpixels
yes, clean install - it's the x64 version (1709 rs3) - i have all the .net and run times installed too.