Page 9 of 14
Re: XnView Shell Extension : localization issue
Posted: Thu Jan 24, 2019 4:11 pm
by LaurentG
Hi,
I have just installed for the first time XnShell extension on Win7 64 bits.
And I discovered that language change do not work in this version (4.0 64 bits.)
Actually, this is due to the fact that HKEY_CURRENT_USER\Software\XnView\ShellEx\language is not correctly set, but contains extra characters (most often two chars, sometimes more) after language code.
If I update manually the entry (with Regedit) to a correct value (eg. "fr"), it works fine.
But registry entry is overwritten each time any option is changed... and then require to be re-set manually at each time with Regedit.
Re: XnView Shell Extension
Posted: Thu Jan 24, 2019 10:35 pm
by emmequ
xnview wrote: ↑Sat Jan 19, 2019 8:21 am
emmequ wrote: ↑Fri Jan 18, 2019 5:30 pm
i tried also to disinstall all xn software + vcredist_x64 and reboot any time. reinstall all and rebot but don't work. i think that there is some of my software that caused an incompatibility.
Same thing?
After i tried also a register with bat file.
you need to run the .bat with admin rights
yes, i launch all with admin rights but an all 3 pc doesn't work.
when i click on xnview option from right click the preview of the file don't appear.
last question. usually it is possible install only xnview shell or it need xnview classic?
Re: XnView Shell Extension : localization issue
Posted: Mon Jan 28, 2019 1:51 pm
by xnview
LaurentG wrote: ↑Thu Jan 24, 2019 4:11 pm
Hi,
I have just installed for the first time XnShell extension on Win7 64 bits.
And I discovered that language change do not work in this version (4.0 64 bits.)
Actually, this is due to the fact that HKEY_CURRENT_USER\Software\XnView\ShellEx\language is not correctly set, but contains extra characters (most often two chars, sometimes more) after language code.
If I update manually the entry (with Regedit) to a correct value (eg. "fr"), it works fine.
But registry entry is overwritten each time
any option is changed... and then require to be re-set manually at each time with Regedit.
ok, right, an update will be soon available...
Re: XnView Shell Extension
Posted: Mon Jan 28, 2019 2:17 pm
by xnview
emmequ wrote: ↑Thu Jan 24, 2019 10:35 pm
yes, i launch all with admin rights but an all 3 pc doesn't work.
when i click on xnview option from right click the preview of the file don't appear.
I've tried on a clean Win10 x64, and no problem
Please try to remove HKCU>Software>XnView>ShellEx from registry
last question. usually it is possible install only xnview shell or it need xnview classic?
you can install it without XnView
Re: XnView Shell Extension
Posted: Mon Jan 28, 2019 4:03 pm
by emmequ
xnview wrote: ↑Mon Jan 28, 2019 2:17 pm
I've tried on a clean Win10 x64, and no problem
Please try to remove HKCU>Software>XnView>ShellEx from registry
you can install it without XnView
i'm think i'm wrong somethink in the installation, beacuse i tried again the installation on other 2 pc where never was installed xn software , i install only xnshell but there is the same problem... the register.bat procedure is required?
in attachment the screenshot of my installation folder
Re: XnView Shell Extension
Posted: Mon Jan 28, 2019 4:13 pm
by xnview
emmequ wrote: ↑Mon Jan 28, 2019 4:03 pm
i'm think i'm wrong somethink in the installation, beacuse i tried again the installation on other 2 pc where never was installed xn software , i install only xnshell but there is the same problem... the register.bat procedure is required?
in attachment the screenshot of my installation folder
Please use the setup
Re: XnView Shell Extension
Posted: Mon Jan 28, 2019 4:19 pm
by emmequ
xnview wrote: ↑Mon Jan 28, 2019 4:13 pm
Please use the setup
sure, i always used setup.
i install with .exe file, then rebot, but without succes
thanks for support, maybe i will retry with future update
Re: XnView Shell Extension
Posted: Tue Jan 29, 2019 6:27 am
by xnview
emmequ wrote: ↑Mon Jan 28, 2019 4:19 pm
thanks for support, maybe i will retry with future update
In your video, why there is a blank area above XnShell item menu?
Re: XnView Shell Extension
Posted: Tue Jan 29, 2019 8:11 am
by emmequ
xnview wrote: ↑Tue Jan 29, 2019 6:27 am
emmequ wrote: ↑Mon Jan 28, 2019 4:19 pm
thanks for support, maybe i will retry with future update
In your video, why there is a blank area above XnShell item menu?
i don't know, but on all computer where i try to install it, don't appear the preview of the picture and there is that blank area up the menu voice
Re: XnView Shell Extension : localization issue
Posted: Tue Jan 29, 2019 8:12 am
by LaurentG
xnview wrote: ↑Mon Jan 28, 2019 1:51 pm
LaurentG wrote: ↑Thu Jan 24, 2019 4:11 pm
Hi,
I have just installed for the first time XnShell extension on Win7 64 bits.
And I discovered that language change do not work in this version (4.0 64 bits.)
Actually, this is due to the fact that HKEY_CURRENT_USER\Software\XnView\ShellEx\language is not correctly set, but contains extra characters (most often two chars, sometimes more) after language code.
If I update manually the entry (with Regedit) to a correct value (eg. "fr"), it works fine.
But registry entry is overwritten each time
any option is changed... and then require to be re-set manually at each time with Regedit.
ok, right, an update will be soon available...
Many thanks for quick update
I confirm it works fine, now, with rev 4.0.3
Re: XnView Shell Extension
Posted: Tue Jan 29, 2019 4:15 pm
by xnview
emmequ wrote: ↑Tue Jan 29, 2019 8:11 am
i don't know, but on all computer where i try to install it, don't appear the preview of the picture and there is that blank area up the menu voice
could you try the new version?
Re: XnView Shell Extension
Posted: Wed Jan 30, 2019 5:28 pm
by emmequ
xnview wrote: ↑Tue Jan 29, 2019 4:15 pm
could you try the new version?
yes, last time i already tried new version
- 2019-01-30 18_27_22-Clipboard.jpg (8.58 KiB) Viewed 7685 times
Re: XnView Shell Extension
Posted: Thu Jan 31, 2019 10:29 am
by lostinpixels
Hello and Thank you for your great programs (xnviewMP is amazing)
I have used the shell extension back in xp and win7 with success - but nothing I tried gets it to work on Win10 (1709).
I've tried all sorts (I know my way around windows) - including latest version, MS runtimes, admin, ownership, install vs zip, registry etc
The context menu does appear but nothing happens when choosing an action (any). If i edit the registry I can change the appearance of the menu
(as when going into options) - which means the shell does read and load the registry settings - but that is the only sign of life.
If anyone can help I would be very grateful - Thanks
Re: XnView Shell Extension
Posted: Thu Jan 31, 2019 2:20 pm
by xnview
lostinpixels wrote: ↑Thu Jan 31, 2019 10:29 am
The context menu does appear but nothing happens when choosing an action (any). If i edit the registry I can change the appearance of the menu
(as when going into options) - which means the shell does read and load the registry settings - but that is the only sign of life.
Same as previous user
Is it a clean Windows 10? Which version?
Re: XnView Shell Extension
Posted: Thu Jan 31, 2019 6:43 pm
by lostinpixels
yes, clean install - it's the x64 version (1709 rs3) - i have all the .net and run times installed too.