Convert EPS to JPEG or GIF
Moderators: XnTriq, helmut, xnview
-
- Posts: 2
- Joined: Wed Aug 13, 2014 7:42 am
Re: Convert EPS to JPEG or GIF
Do you have Ghostscript http://www.ghostscript.com installed, x64 as you are using NConvert x64?ultrashark92 wrote:How can i convert EPS to JPEG
EPS is an unusual format but I think as for PDF you need Ghostscript installed to rasterise your images, and you will probably need to set a suitable DPI value to obtain a good image quality using -dpi, default value is 72DPI.
Do you have the NConvert syntax, obtainable by entering -help at the command prompt?
If you need further help could you post your command line between Code tags so that it is easily readable.
-
- Posts: 2
- Joined: Wed Aug 13, 2014 7:42 am
Re: Convert EPS to JPEG or GIF
Yes Ghostscript is installed as x64 & NConvert too.cday wrote: Do you have Ghostscript http://www.ghostscript.com installed, x64 as you are using NConvert x64?
After reinstall Ghostscript the eps can convert to jpeg.
But how can i change the size and the dpi
Code: Select all
nconvert -out jpeg -truecolors -resize 510 0 -dpi 300 C:\Users\reiss_j\Desktop\test\*.EPS
Code: Select all
** NCONVERT v6.56 (c) 1991-2013 Pierre-E Gougelet (Apr 7 2014/09:38:50) **
Version for Windows Xp/Vista/7 x64 (All rights reserved)
** This is freeware software (for non-commercial use)
Error: Can't open file (nconvert)
Error: Can't open file (-out)
Error: Can't open file (jpeg)
Error: Can't open file (-truecolors)
Error: Can't open file (-resize)
Error: Can't open file (510)
Error: Can't open file (0)
Error: Can't open file (-dpi)
Error: Can't open file (300)
GS: (C:\Program Files\gs\gs9.14\bin\gsdll64.dll)
ARG 0 -dMaxBitmap=300000000
ARG 1 -sDEVICE=pnmraw
ARG 2 -q
ARG 3 -dNOPAUSE
ARG 4 -dSAFER
ARG 5 -dTextAlphaBits=4
ARG 6 -dGraphicsAlphaBits=4
ARG 7 -g3618x1500
ARG 8 -r1524.00
ARG 9 -sOutputFile=C:\Users\reiss_j\AppData\Local\Temp\x_17D6.tmp
ARG 10 C:\Users\reiss_j\AppData\Local\Temp\x_163F.tmp
ARG 11 -c quit
ARG 12 -c quit
==> 231
Re: Convert EPS to JPEG or GIF
In the Help file the EPS format is lowercase eps, that might be why the input files aren't read...
And I think you need a -o term to set the output file name...
A wildcard * will do I think, or there are other options in the Help file.
You can save the Help file as a text file using this code:
And I think you need a -o term to set the output file name...
A wildcard * will do I think, or there are other options in the Help file.
You can save the Help file as a text file using this code:
Code: Select all
nconvert -help > nconvert_help.txt
Re: Convert EPS to JPEG or GIF
Please, what's wrong?
nconvert -in eps -dpi 300 -colors 256 -ctype rgb -o file.jpg file.ps
Error: don't know how to read this picture (file.ps)
gs x32 exists (xnview reads postscript files) and i read help
nconvert 6.56
nconvert -in eps -dpi 300 -colors 256 -ctype rgb -o file.jpg file.ps
Error: don't know how to read this picture (file.ps)
gs x32 exists (xnview reads postscript files) and i read help
nconvert 6.56
Re: Convert EPS to JPEG or GIF
You're using NConvert 6.56 x32 are you? (NConvert x64 would require GS x64... You say you can read Postscript files...)sartaros wrote:Please, what's wrong?
nconvert -in eps -dpi 300 -colors 256 -ctype rgb -o file.jpg file.ps
Error: don't know how to read this picture (file.ps)
gs x32 exists (xnview reads postscript files) and i read help
nconvert 6.56
Could you please clarify the filename of your input file and the type(s) of output file you wish to create... (file.ps is a Postscript file and is being interpreted as an input file, and there is no EPS file (extension .eps) in your command line... )
http://en.wikipedia.org/wiki/PostScript
http://en.wikipedia.org/wiki/Encapsulated_PostScript
Do you have a sample file you could upload (1MiB max and placed in a ZIP so that it can be uploaded)?
Re: Convert EPS to JPEG or GIF
/Continued...
To convert an EPS file to JPG, replace file.ps by file.eps .
Notes:
You can place a -dpi 300 term at the start of the command line, as in the code you posted, to increase the DPI of the resulting image from the GhostScript default value of 72dpi to 300dpi, for a better quality image.
The JPG format only supports 24 bit colour and grayscale, so the -colors 256 term in your code will not achive that result.
You can add JPG compression and other options as shown in the Help file, if required.
The -ctype rgb term in your code is probably not required as RGB is the default value, I believe.
Although the term -in is shown in the NConvert documentation it isn't normally used, and the input file(s) are simply placed at the end of the command line, as in the example code above.
To convert a Postscript file to JPG please try the following basic code:sartaros wrote:Please, what's wrong?
nconvert -in eps -dpi 300 -colors 256 -ctype rgb -o file.jpg file.ps
Code: Select all
nconvert -out jpeg file.ps
Notes:
You can place a -dpi 300 term at the start of the command line, as in the code you posted, to increase the DPI of the resulting image from the GhostScript default value of 72dpi to 300dpi, for a better quality image.
The JPG format only supports 24 bit colour and grayscale, so the -colors 256 term in your code will not achive that result.
You can add JPG compression and other options as shown in the Help file, if required.
The -ctype rgb term in your code is probably not required as RGB is the default value, I believe.
Although the term -in is shown in the NConvert documentation it isn't normally used, and the input file(s) are simply placed at the end of the command line, as in the example code above.