XnView Software

When you set the thumbnail size for the browser at 150x150 or 128x128, thumbnails of WDP images are only 90x90. If you set thumbs to 100x100, WDP images seem to be the right size, but the difference between 90 and 100 is difficult to tell. Smaller than 100x100 seems to work fine, and strangely enough, 192x192 seems to work fine. Unfortunately, 150x150 (or at least 128x128) is what works best for me.

I first noticed this issue in an older version (1.92(beta), I believe) and so i tried the current version (1.96.5) and the problem is still there.

Could you send me a sample?

I sent an email with a JPG and a WDP version of the same image to the webmaster email. Both images were created with xnview, the JPG thumbnail resizes properly, the WDP thumbnail won't go larger than 90x90 unless you jump all the way to 192x192.

Just a note that this bug has been fixed in v1.97. WDP images saved with an older version still display the small thumbnail in the new version (apparently they have embedded thumbnails), but ones saved with v1.97 behave properly.
This bug can be marked as fixed now & this thread deleted or whatever.

It appears that this bug isn't actually fixed after all. Images with a ratio of 1.25 show full sized thumbnails, but ones with a ratio of 1.60 are still maxing out at 90x90.
An additional oddity is that when you mouse over the thumbnail of any other image format, the tooltip shows the dimensions of the actual image. When you mouse over a wdp however, the tooltip shows the dimensions of the thumbnail.

For example (with the browser thumbnail size set to 150x150):
A 1280x1024 (ratio 1.25) image saved as a JPG and results in a 150x120 thumbnail, and the tooltip indicates the dimanesions are 1280x1024.
The same image saved as a WDP file also results in a 150x120 thumbnail, but the tooltip gives the dimensions as 160x128.

A 1440x900 (ratio 1.60) image saved as a PNG results in a 150x95 thumbnail, and the tooltip indicates that the dimensions are 1440x900.
The same image saved as a WDP results in a 90x58 thumbnail, and the tooltip gives the dimensions as 90x57.


I noticed this issue with v1.97. I then downloaded the current version (v1.97.4) and it still has the problem. It makes no difference if the WDP images were originally created with 1.97.4, or an early version, the results are the same.

Could you send me samples?

Sent.

I did some further poking around, and found that 150x150 is the only size at which this occurs. At any other size from 100x100 up through 192x192 (inclusive) both images have a thumbnail which is too small. At any size up to (and including) 85x85, they both have properly sized thumbnails.