XnViewMP 0.93.1 - Use CPU Core's - limited to last used setting
Posted: Thu Mar 07, 2019 6:56 pm
First thank you for the latest update of XnViewMP. It is fantastic!
My Intel i8700k CPU can use up to 12 cpu cores.
--- Description ---
1. Start XnviewMP
1. Open the batch conversion mode
2. Choose many files (e.g. 100 pictures) to convert
3. Set used cpu cores to a smaller value than your cpu can use!!!
(E.g. My CPU can use 12 cores and I selected 4 cores only).
4. Start the batch conversion
5. Batch conversion is successfully finished
I closed the dialog and want to start another batch conversion of other files.
1. Start Batch conversion mode
2. Add many files (e.g. 100 pictures)
3. Set the "use cpu cores" e.g. 6 or higher.
Here is the problem! In the first chapter, I limited the used cpu cores to 4 cores!
Now the highest possible setting is 4 cores, although my cpu can use up to 12 cores!
I can not move the slider to a higher value.
The only workaround for me is to close xnviewmp and start it again!
Then I can choose 12 cpu cores in batch mode again.
My Intel i8700k CPU can use up to 12 cpu cores.
--- Description ---
1. Start XnviewMP
1. Open the batch conversion mode
2. Choose many files (e.g. 100 pictures) to convert
3. Set used cpu cores to a smaller value than your cpu can use!!!
(E.g. My CPU can use 12 cores and I selected 4 cores only).
4. Start the batch conversion
5. Batch conversion is successfully finished
I closed the dialog and want to start another batch conversion of other files.
1. Start Batch conversion mode
2. Add many files (e.g. 100 pictures)
3. Set the "use cpu cores" e.g. 6 or higher.
Here is the problem! In the first chapter, I limited the used cpu cores to 4 cores!
Now the highest possible setting is 4 cores, although my cpu can use up to 12 cores!
I can not move the slider to a higher value.
The only workaround for me is to close xnviewmp and start it again!
Then I can choose 12 cpu cores in batch mode again.
Thanks to your detailed description I can reproduce