Page 1 of 1
Crash while opening JPEG file
Posted: Sun Jul 26, 2009 1:35 am
by DarkCat
http://www.kinopoisk.ru/images/poster/or_871062.jpg (4040x5747 px, 2.1 MB)
I save this picture in my hard drive, then open it and the program crash. (version 1.96.2)
Application popup:
XnView: xnview.exe - Application Error
The instruction at "0x005c72e8" referenced memory at "0x00e74000". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
This is my problem?
In other picture viewers it's ok...
Re: Crash while opening JPEG file
Posted: Sun Jul 26, 2009 3:48 am
by Clo
DarkCat
Hello ! Welcome aboard !
• I downloaded then displayed that image in XnView 1.96.2 without any problem…
or_871062.jpg 2 165 640 (Bytes) 26/07/2009 05:40 -a--
------------------------
SHA1 Checksum :
93a443c6fb271bb25e0c2d59afa4e3baaa13cccd *or_871062.jpg
• In “View” mode (from Total Commander >> Button on the tool-bar).
Kind regards
Claude
Clo
Win XP-Pro SP1 (FR)
Re: Crash while opening JPEG file
Posted: Sun Jul 26, 2009 6:15 am
by XnTriq
JPEGsnoop wrote:Code: Select all
*** Decoding SCAN Data ***
OFFSET: 0x00003DA3
Scan Decode Mode: Full IDCT (AC + DC)
Scan Data encountered marker 0xFFD9 @ 0x00210B86.0
*** NOTE: YCC Clipped. MCU=( 179, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 179, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 179, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 179, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 182, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 182, 38) YCC=( -3, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 182, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 179, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 179, 38) YCC=( -1, 128, 128) Y Underflow @ Offset 0x00210B85.7
*** NOTE: YCC Clipped. MCU=( 182, 38) YCC=( -6, 128, 128) Y Underflow @ Offset 0x00210B85.7
Only reported first 10 instances of this message...
Compression stats:
Compression Ratio: 32.40:1
Bits per pixel: 0.74:1
Re: Crash while opening JPEG file
Posted: Sun Jul 26, 2009 8:19 am
by eL_PuSHeR
It seems Irfanview displays it without problems.
Re: Crash while opening JPEG file
Posted: Sun Jul 26, 2009 4:14 pm
by Clo
eL_PuSHeR
Hello !
• It works OK here too in “Imagine” and “Universal Viewer”, still from Total Commander…
… and like I said above, no problem in XnView 1.96.2. The option
Fit Image to window (large only) is
ON.
KR
Claude
Clo
Re: Crash while opening JPEG file
Posted: Mon Jul 27, 2009 12:54 pm
by xnview
With last version?
