Applied update and now XnView won't even open
Moderator: xnview
-
Nagna
- Posts: 3
- Joined: Fri Oct 02, 2026 8:11 pm
Applied update and now XnView won't even open
Today I opened a jpeg image using XnView because I wanted to crop it. Immediately up popped a notice that there was an update. I downloaded the update and closed the open XnView window. Then I used the package installer to install the update. After that XnView would not open. I rebooted my computer but XnView still would not open. I then uninstalled XnView and reinstalled it from the XnView web site. I am running Linux Mint 22.3 and downloaded the Deb version. Every time I've installed XnView, including the update, it says the installation was successful. I uninstalled and reinstalled a couple of times. But it won't work anymore. I've been using Linux Mint for over 12 years now and this is the very first time an update installation has led to this issue.
-
Juergen
- Posts: 1
- Joined: Fri Oct 02, 2026 10:46 pm
Re: Applied update and now XnView won't even open
I encountered the same problem. After installation of XnView MP 1.12.1 (message said: successfull) the programme did not start. Rebooting the computer did not help. I use Linux Mint 22.2 Zara.
Uninstalling delivered the following message:
Error while installing package: »installiertes post-installation-Skript des Paketes linux-headers-7.0.0-31-generic«-Unterprozess gab den Fehlerwert 11 zurück.
Finally, the new XnView MP 1.12.1 has been uninstalled, and I successfully installed ver 11.7 again, which runs as usual.
Uninstalling delivered the following message:
Error while installing package: »installiertes post-installation-Skript des Paketes linux-headers-7.0.0-31-generic«-Unterprozess gab den Fehlerwert 11 zurück.
Finally, the new XnView MP 1.12.1 has been uninstalled, and I successfully installed ver 11.7 again, which runs as usual.
-
Nagna
- Posts: 3
- Joined: Fri Oct 02, 2026 8:11 pm
Re: Applied update and now XnView won't even open
Glad to know I'm not alone with this issue.
I tried to install 1.11.7 but I'm getting either a 'The requested URL was not found on this server' message from the main download page; or if I search and find an xnview page that says 'You can download XnView MP 1.11.7 here:' and I select the Linux Deb option, download it and install the package, it tells me it is 1.12.1 and it's back to not even opening. I tried searching for 1.11.7 on other sites without success. I guess I'll have to find an alternative to xnview that actually works.
I tried to install 1.11.7 but I'm getting either a 'The requested URL was not found on this server' message from the main download page; or if I search and find an xnview page that says 'You can download XnView MP 1.11.7 here:' and I select the Linux Deb option, download it and install the package, it tells me it is 1.12.1 and it's back to not even opening. I tried searching for 1.11.7 on other sites without success. I guess I'll have to find an alternative to xnview that actually works.
-
xnview
- Author of XnView
- Posts: 49013
- Joined: Mon Oct 13, 2003 7:31 am
- Location: France
Re: Applied update and now XnView won't even open
Whats happened when you try to start it from a terminal?
You can try to install xcursor
You can try to install xcursor
Code: Select all
sudo apt install libxcb-cursor0-
marp
- Posts: 8
- Joined: Fri Oct 25, 2024 5:00 pm
Re: Applied update and now XnView won't even open
Same behaviour for me on Ubuntu 24.04.5 LTS (XOrg, Gnome).
If I start via terminal, I get a message "Aborted (core dumped)".
Plus QT plugin error:
Manually installing libxcb-cursor0 via apt resolves the problem.
=> Please urgently add that as a dependency to the DEB package...
If I start via terminal, I get a message "Aborted (core dumped)".
Plus QT plugin error:
Downgrading to 1.11.7, and all is working fine again.qt.qpa.plugin: From 6.5.0, xcb-cursor0 or libxcb-cursor0 is needed to load the Qt xcb platform plugin.
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
Manually installing libxcb-cursor0 via apt resolves the problem.
=> Please urgently add that as a dependency to the DEB package...
-
Nagna
- Posts: 3
- Joined: Fri Oct 02, 2026 8:11 pm
Re: Applied update and now XnView won't even open
marp beat me to the reply. I received the same message and I installed 'sudo apt install libxcb-cursor0' as recommended by xnview. Now the programme opens and I have version 1.12.1. I think this means the issue is resolved. Thanks to all.
-
greatlakes
- Posts: 3
- Joined: Wed Oct 07, 2026 10:32 pm
Re: Applied update and now XnView won't even open
Don't know if this is related.
I am running Linux Ubuntu 20.04.6 LTS 64bit
I have been using XnView MP version 1.10.5 64-bit
Received an update prompt when opening the program and followed the update
path provided to install 1.12.1, which would not open.
I realized 1.12.1 won't run under Ubuntu 20.04 and uninstalled XnView
then installed the DEB of 1.11.7 which says is valid for Linux: Ubuntu 18.04+
Using the DEB file from
https://download.xnview.com/versions/XnView_MP/
That version 1.11.7 also will not open. I checked and found my
libxcb-cursor0 is already the newest version (0.1.1-4ubuntu1)
Any more ideas why 1.11.7 won't open on my Ubuntu 20.04 ?
The most current version which will run for me is 1.11.2
There is no 1.11.3 installation package I can find; 1.11.4 won't start up.
I am running Linux Ubuntu 20.04.6 LTS 64bit
I have been using XnView MP version 1.10.5 64-bit
Received an update prompt when opening the program and followed the update
path provided to install 1.12.1, which would not open.
I realized 1.12.1 won't run under Ubuntu 20.04 and uninstalled XnView
then installed the DEB of 1.11.7 which says is valid for Linux: Ubuntu 18.04+
Using the DEB file from
https://download.xnview.com/versions/XnView_MP/
That version 1.11.7 also will not open. I checked and found my
libxcb-cursor0 is already the newest version (0.1.1-4ubuntu1)
Any more ideas why 1.11.7 won't open on my Ubuntu 20.04 ?
The most current version which will run for me is 1.11.2
There is no 1.11.3 installation package I can find; 1.11.4 won't start up.
-
xnview
- Author of XnView
- Posts: 49013
- Joined: Mon Oct 13, 2003 7:31 am
- Location: France
Re: Applied update and now XnView won't even open
when you start it in a terminal, what do you have?greatlakes wrote: Thu Oct 08, 2026 12:44 am Any more ideas why 1.11.7 won't open on my Ubuntu 20.04 ?
The most current version which will run for me is 1.11.2
There is no 1.11.3 installation package I can find; 1.11.4 won't start up.
-
greatlakes
- Posts: 3
- Joined: Wed Oct 07, 2026 10:32 pm
Re: Applied update and now XnView won't even open
Installed 1.11.4 since it is first version which won't open for me. Terminal start produced:
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `CXXABI_1.3.13' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /opt/XnView/lib/liblibraw.so.1)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by /opt/XnView/lib/libXMPCore.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/XnView/lib/libXMPCore.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `CXXABI_1.3.13' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /opt/XnView/XnView)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /opt/XnView/lib/liblibraw.so.1)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by /opt/XnView/lib/libXMPCore.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/XnView/lib/libXMPCore.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/XnView/lib/libXMPFiles.so)
/opt/XnView/XnView: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /opt/XnView/lib/libXMPFiles.so)
-
xnview
- Author of XnView
- Posts: 49013
- Joined: Mon Oct 13, 2003 7:31 am
- Location: France
Re: Applied update and now XnView won't even open
Latest version needs glibc 2.32, so ubuntu 22greatlakes wrote: Thu Oct 08, 2026 12:44 pm Installed 1.11.4 since it is first version which won't open for me. Terminal start produced:
-
greatlakes
- Posts: 3
- Joined: Wed Oct 07, 2026 10:32 pm
Re: Applied update and now XnView won't even open
Okay, I will use 1.11.2 until I get around to updating to Ubuntu 22.
Thanks!
Thanks!
-
cragni
- Posts: 1
- Joined: Tue Oct 13, 2026 4:20 am
Re: Applied update and now XnView won't even open
Hi, I was using a very old 2019 XnviewMP version and downloaded the latest version for MacOS. Now it won't load at all. When I click on the new icon a window pops up but disappears before I can even read it. I already deleted the old version to avoid confusion, so now I am in trouble. Can anyone help? Thank you.
-
xnview
- Author of XnView
- Posts: 49013
- Joined: Mon Oct 13, 2003 7:31 am
- Location: France
Re: Applied update and now XnView won't even open
Please try to delete the xnview.ini/dbcragni wrote: Tue Oct 13, 2026 4:25 am Hi, I was using a very old 2019 XnviewMP version and downloaded the latest version for MacOS. Now it won't load at all. When I click on the new icon a window pops up but disappears before I can even read it. I already deleted the old version to avoid confusion, so now I am in trouble. Can anyone help? Thank you.